Submissions from 2026
Analysis of Approximations in Flash Thermal Diffusivity Measurements Using High‑Fidelity Simulations, Tage T. Burnett, Jakob G. Bates, Matthew R. Jones, Christopher R. Dillon, and John Tencer
Influence of Superhydrophobic Surface Microstructure on Transient Jet Impingement Cooling, D. Jacob Butterfield, Brian D. Iverson, Daniel Maynes, and Julie Crockett
Efficient Derivative Computation for Unsteady Fatigue-constrained Nonlinear Aero-structural Wind Turbine Blade Optimization, Adam Cardoza and Andrew Ning
Mission-Focused Multidisciplinary Design Optimization of Tilt-Rotor eVTOL Propulsion System, Tyler Critchfield and Andrew Ning
Introduction To and Comparison Of Deep Learning and Optimization Approaches to Analytical Wake Modeling of a Tilted Wind Turbine, James Cutler, Christopher Bay, and Andrew Ning
Cyclic Testing of Membrane Hinges for Use in Origami-inspired Engineering Design, Larry L. Howell, Barry Creighton, Andrew Geyser, Spencer P. Magleby, and Mitchel Skinner
Efficiently Stowed Flashers With Uniform-Thickness Panels Based on Non-Developable Origami, Larry L. Howell, Robert J. Lang, Specer P. Magleby, and Davis Wing
Constant Thickness Accommodation for Origami Flashers, Larry L. Howell, H. Pruett, and Spencer Magleby
Influence of Surface Features on Heat Transfer During Dropwise Condensation over Superhydrophobic Surfaces in Shear Flow, Shaur Humayun, R. Daniel Maynes, Julie Crocket, and Brian D. Iverson
Property Tables for Thermally Perfect Gases at Low Pressure, Travis J. Moore and Matthew R. Jones
Sparsity Applications for Gradient-Based Optimization of Wind Farms, Benjamin Varela and Andrew Ning
Submissions from 2025
Actuator Disk Model for Aeropropulsive Coupling Effects in Vortex Particle Method, Eduardo Alvarez, Vineet Ahuja, Vinod Lakshminarayan, Aaron Perry, Ryan Anderson, and Andrew Ning
Potential of Individual Upper-Limb Muscles to Contribute to Postural Tremor: Simulations From Neural Drive to Joint Rotation, Spencer A. Baker, Landon J. Beutler, Daniel B. Free, Dario Farina, and Steven Knight Charles
Internally Stowed, Radially Deployed Radiator Panels for Passive CubeSat Thermal Control, Josh R. Cannon, Kyle N. Havey, Noah S. Housley, Rydge B. Mulford, and Brian D. Iverson
Design and Testing of a Precision Coupling for Origami-based Arrays, Larry L. Howell, Philip B. Klocke, Spencer P. Magleby, Clark Roubiecek, and Davis Wing
Origami Folding Pattern Development for Gossamer 18 Structures, Larry L. Howell, Ivy Running, Carolina Wright, Robert J. Lang, and Spencer Magleby
A generalized coherence framework for quantifying input contributions in multi-input systems with correlated or uncorrelated inputs, Nolan H. Howes, Matthew S. Allen, Dario Farina, and Steven Knight Charles
Drop Dynamics during Condensation on Superhydrophobic Surfaces in Vapor Shear Flow, Shaur Humayun, R. Daniel Maynes, Julie Crockett, and Brian D. Iverson
Comparing the sensitivity and specificity of novel motor assessments for traumatic brain injury, Paula K. Johnson, Ariana M. Hedges-Muncy, Erin D. Bigler, Lorie Richards, and Steven Knight Charles
Wind Turbine Rotor Design Using High-Fidelity Aerostructural Optimization, Marco Mangano, Sicheng He, Yingqian Liao, Denis-Gabriel Caprace, Andrew Ning, and Joaquim R. R. A. Martins
Impact of Non-Uniform Surface Temperature on the Apparent Radiative Properties of Cavity Receivers, Ehsan Mofidipour, Matthew R. Jones, and Brian D. Iverson
Mill Power Consumption and Fuel Particle Size Distribution While Co-milling Bituminous Coal with Steam-exploded Woody Biomass in a Conventional Bowl Mill, Brian Schoof, Rajarshi Roy, Regan Kuttler, Parker LaTour, Scott Montgomery, Jacob Tuttle, Gwendolyn Bennett Bennett, Brian D. Iverson, and Andrew Fry
Untethered Isoperimetric Robotic Truss for Lunar Applications, Mihai Stanciu, Spencer Stowell, Isaac Weaver, Adam Rose, Chris Paul, James Wade, Ashleigh Cerven, Annie O'Bryan, Brian Bodily, Logan Yang, and Nathan Usevitch
Integration of sCO2 Brayton Cycles With Carbon Capture Systems, Nathan C. Stearns, Rajarshi Roy, Brian Schooff, Andrew Chiodo, Andrew R. Fry, and Brian D. Iverson
Feedback parameters for a closed-loop multiple-input multiple-output model of the upper limb, Ian Syndergaard, Daniel B. Free, Dario Farina, and Steven Knight Charles
Submissions from 2024
Solving Unsteady Potential Flow Problems in O(n) Time, Ryan Anderson and Andrew Ning
IFN-𝜸 and IL-10 Immunosensor with Vertically Aligned Carbon Nanotube Interdigitated Electrodes toward Pen-Side Cattle Paratuberculosis Monitoring, Shaowei Ding, Benjamin J. Brownlee, Kshama Parate, Cicero C. Pola, Bolin Chen, Jesse M. Hostetter, Douglas Jones, John Jackman, Brian D. Iverson, and Jonathan C. Claussen
IFN-𝜸 and IL-10 Immunosensor with Vertically Aligned Carbon Nanotube Interdigitated Electrodes toward Pen-Side Cattle Paratuberculosis Monitoring, Shaowei Ding, Benjamin J. Brownlee, Kshama Parate, Cicero C. Pola, Bolin Chen, Jesse M. Hostetter, Douglas Jones, John Jackman, Brian D. Iverson, and Jonathan C. Claussen
Transient Heat Transfer to Rolling or Sliding Drops on Inclined Heated Superhydrophobic Surfaces, Joseph Furner, Daniel Maynes, Brian D. Iverson, and Julie Crockett
Derivative Propagation Through Vortex Particle Method Simulation, Eric Green and Andrew Ning
Methodology for Designing and Improving Novel Kirigami Patterns using the Hamiltonian Circuit Framework, Larry L. Howell, Nathan Coleman, McKaelin Edralin, Specer P. Magleby, Denise Halverson, and Zhong You
Leveraging Compliance to Design a Minimally Invasive, Expandable Interbody Cage Capable of Customized Anatomical Fit for Spinal Fusion Surgery, Larry L. Howell, Daniel J. Orr, Anton E. Bowden, Christian Payne, Hailey Jones, Bruce M. Frankel, James Anderson, Alek Sperry, and Brandon Sargent
Characterization of Magnetically Stabilized Hinges for Origami-Inspired Mechanisms, Larry L. Howell, H T. Pruett, Philip Klocke, and Spencer Magleby
The Surrogate Fold Catalog: A Design Tool for Origami-Inspired Mechanical Systems, Larry L. Howell, Ivy Running, Phebe Ramsdell, Carolina Wright, and Spencer P. Magleby
Drop Retention and Departure in Adiabatic Shear Flow on Structured Superhydrophobic Surfaces, Blake M. Lyons, Daniel Maynes, Julie Crockett, and Brian D. Iverson
Geometrically Exact Beam Theory for Gradient-Based Optimization, Taylor McDonnell and Andrew Ning
Interactional Aerodynamics Analysis of a Multi-Rotor Energy Kite, Judd Mehr, Eduardo Alvarez, and Andrew Ning
DuctAPE: A steady-state, axisymmetric ducted fan analysis code designed for gradient-based optimization, Judd Mehr and Andrew Ning
Review of the Cavity Effect: Modeling and Impact of Cavity Shape on Apparent Radiative Surface Properties, Ehsan Mofidipour, Matthew R. Jones, and Brian D. Iverson
Synergistic reduction of SO2 emissions while co-firing biomass with coal in pilot-scale (1.5 MWth) and full-scale (471 MWe) combustors, Rajarshi Roy, Spencer Bandi, Xiaolong Li, Brian Schooff, Regan Kuttler, Megan Aichele, Scott Montgomery, Jacob Tuttle, Stacey J. Smith, Jost O.L. Wendt, Brian D. Iverson, and Andrew Fry
Steam explosion treated biomass as a renewable fuel source: A review from collection to combustion, Rajarshi Roy, Barron Hewetson, Brian Schooff, Spencer Bandi, Parker LaTour, Brian D. Iverson, and Andrew Fry
Review of Computational Models for Large-Scale MDAO of Urban Air Mobility Concepts, Darshan Sarojini, Marius L. Ruh, Jiayao Yan, Luca Scotzniovsky, Nicholas C. Orndorff, Ru Xiang, Han Zhao, Joshua J. Krokowski, Michael Warner, Sebastiaan PC van Schie, Ashley Cronk, Alexandre T. R. Guibert, Jeffrey T. Chambers, Lauren Wolfe, Rachel Doring, Robin Despins, Cibin Joseph, Ryan Anderson, Andrew Ning, Hyunjune Gill, Seongkyu Lee, Zeyu Cheng, Zhi Cao, Chunting Mi, Y Shirley Meng, Christopher Silva, Jiun-Shyan Chen, H. Alicia Kim, and John T. Hwang
Trajectory Optimization of eVTOL and Conventional Aircraft: A Comparative Analysis of Vortex Particle Method and Vortex Lattice + Blade Element Momentum Theory, Andrew Tagg, Ryan Anderson, Cibin Joseph, and Andrew Ning
Submissions from 2023
Vortex Particle Method for Electric Ducted Fan in Non-Axisymmetric Flow, Eduardo Alvarez, Cibin Joseph, and Andrew Ning
Vortex Particle Method Formulation for Meshless Large-Eddy Simulation, Eduardo Alvarez and Andrew Ning
A Coupled Source Panel, Actuator Line, and Viscous Vortex Particle Method in an O(n) Scheme, Ryan Anderson and Andrew Ning
Aerostructural Predictions Combining FEniCS and a Viscous Vortex Particle Method, Ryan Anderson, Andrew Ning, Ru Xiang, Sebastiaan P. C. van Schie, Mark Sperry, Darshan Sarojini, David Kamensky, and John T. Hwang
Thickness-utilizing deployable hard stops for origami-based design applications, David W. Andrews, Spencer P. Magleby, and Larry L. Howell
Origami fold states: concept and design tool, Alex Avila, Spencer P. Magleby, Robert J. Lang, and Larry L. Howell
Normalized Coordinate Equations and Energy Method for Predicting Natural Curved-Fold Configurations, Jacob Badger, Todd G. Nelson, Rober J. Lang, Denise M. Halverson, and Larry L. Howell
On the Modeling of a Contact-Aided Cross-Axis Flexural Pivot, Pietro Bilancia, Giovanni Berselli, Spencer P. Magleby, and Larry L. Howell
Zero Torque Compliant Mechanisms Employing Pre-Buckled Beams, Pietro Bilancia, Samuel Porter Smith, Giovanni Berselli, Spencer P. Magleby, and Larry L. Howell
Limits of Extramobile and Intramobile Motion of Cylindrical Developable Mechanisms, Jared Butler, Larry L. Howell, Spencer P. Magleby, and Jacob Greenwood
A Model for Multi-Input Mechanical Advantage in Origami-Based Mechanisms, Jared Butler, Adam Shrager, Timothy Simpson, Landen Bowen, Mary Frecker, Robert Lang, Eric Wilcox, Paris von Lockette, Larry L. Howell, and Spencer P. Magleby
Triangular Fin Array Passively Actuated by Bimetallic Coils for CubeSat Thermal Control, Josh Cannon, Rydge B. Mulford, and Brian D. Iverson
Large Eddy Simulation for Empirical Modeling of the Wake of Three Urban Air Mobility Vehicles, Denis-Gabriel Caprace and Andrew Ning
Symmetric Equations for Evaluating Maximum Torsion Stress of Rectangular Beams in Compliant Mechanisms, Guimin Chen and Larry L. Howell
Membrane-enhanced Lamina Emergent Torsional Joints for Surrogate Folds, Guimin Chen, Spencer P. Magleby, and Larry L. Howell
Membrane-enhanced Lamina Emergent Torsional Joints for Surrogate Folds, Guimin Chen, Spencer P. Magleby, and Larry L. Howell
Low-fidelity design optimization and parameter sensitivity analysis of tilt-rotor eVTOL electric propulsion systems, Tyler Critchfield and Andrew Ning
Regional Stiffness Reduction Using Lamina Emergent Torsional Joints for Flexible Printed Circuit Board Design, Bryce P. DeFigueiredo, Brian Dale Russell, Trent K. ZImmerman, and Larry L. Howell
Origami-based Design of Conceal-and-Reveal Systems, Bryce P. DeFigueiredo, Kyler A. Tolman, Spencer P. Magleby, Nathan A. Pehrson, Erica Crampton, and Larry L. Howell
A Design Approach to Fully Compliant Multistable Mechanisms Employing a Single Bistable Mechanism, Yanjie Gou, Guimin Chen, and Larry L. Howell
Conceptualizing Stable States in Origami-Based Devices Using an Energy Visualization Approach, Jacob Greenwood, Larry L. Howell, Alex Avila, and Spencer P. Magleby
Developable Mechanisms on Regular Cylindrical Surfaces, Jacob R. Greenwood, Spencer P. Magleby, and Larry L. Howell
A Personal Tribute to Professor Ashok Midha, Larry L. Howell
Developable Mechanisms on Right Conical Surfaces, Lance P. Hyatt, Spencer P. Magleby, and Larry L. Howell
Large Deflection Analysis of General Beams in Contact-Aided Compliant Mechanisms Using Chained Pseudo-Rigid-Body Model, Mohui Jin, Collin Ynchausti, Xianmin Zhang, Zhou Yang, Benliang Zhu, and Larry L. Howell
A CPRBM-based method for large-deflection analysis of contact-aided compliant mechanisms considering beam-to-beam contacts, Mohui Jin, Benliang Zhu, Jiasi Mo, Zhou Yang, Xianmin Zhang, and Larry L. Howell
A Foldable and Reconfigurable Monolithic Reflectarray for Space Applications, Abdul-Sattar Kaddour, Carlos Alberto Velez, Muhammad Hamza, Nathan Brown, Collin Ynchausti, Spencer P. Magleby, Larry L. Howell, and Stavros V. Georgakopoulos
Rigidly Foldable Thick Origami Using Designed-Offset Linkages, Robert J. Lang, Nathan Brown, Brian Ignaut, Spencer P. Magleby, and Larry L. Howell
Thermal atomization on superhydrophobic surfaces of varying temperature jump length, Eric D. Lee, Daniel Maynes, Julie Crockett, and Brian D. Iverson
Kinematic/static model of complex compliant mechanisms with serial-parallel substructures: a general approach, Mingxiang Ling, Junyi Cao, and Larry L. Howell
A pseudo-static model for dynamic analysis on frequency domain of distributed compliant mechanisms, Mingxiang Ling, Larry L. Howell, June Cao, and Zhou Jiang
Kinetostatic and Dynamic Modeling of Flexure-Based Compliant Mechanisms: A Survey, Mingxiang Ling, Larry L. Howell, Junyi Cao, and Guimin Chen
Measured spectral, directional radiative behavior of corrugated surfaces, Kyle S. Meaker, Ehsan Modfidipour, Matthew R. Jones, and Brian D. Iverson
Origami-Inspired Sacrificial Joints for Folding Compliant Mechanisms, Todd G. Nelson, Alex Avila, Larry L. Howell, Just L. Herder, and Davood Farhadi Machekposhtic
Deployable Convex Generalized Cylindrical Surfaces Using Torsional Joints, Todd G. Nelson, Jared T. Burton, Curtis G. Nelson, Luis M. Baldelomar Pinto, Zhicheng Deng, and Larry L. Howell
Load-Displacement Characterization in Three Degrees of Freedom for General LET Arrays, Nathan A. Pehrson, Pietro Bilancia, Spencer P. Magleby, and Larry L. Howell
Changes in the mechanical performance of an ortho-planar spring after aging tests, Lucas F. L. Santos, Larry L. Howell, and Jose J. R. d’Almeida
Heat Set Creases in Polyethylene Terephthalate (PET) Sheets to Enable Origami-Based Applications, Brandon Sargent, Nathan Brown, Brian D. Jensen, Spencer P. Magleby, William G. Pitt, and Larry L. Howell
An Origami-Based Medical Support System to Mitigate Flexible Shaft Buckling, Brandon Sargent, Jared Butler, Kendall Seymour, David Bailey, Brian D. Jensen, Spencer P. Magleby, and Larry L. Howell
User Guide for Urban Canopy Modeling in WRF. Version 1.0, Corey L. Smithson, Natalie J. White, Hans R. Klomp, Eric C. Monson, and Bradley R. Adams
Sparsity for Gradient-Based Optimization of Wind Farm Layouts, Benjamin T. Varela and Andrew Ning
Analysis of the Rigid Motion of a Conical Developable Mechanism, McKell Woodland, Michelle Hsiung, Erin L. Matheson, C Alex Safsten, Jacob Greenwood, Denise M. Halverson, and Larry L. Howell
Design of Regular 1D, 2D, and 3D Linkage-Based Tessellations, Alden D. Yellowhorse, Nathan Brown, and Larry L. Howell
Creating Linkage Permutations to Prevent Self-Intersection and Enable Deployable Networks of Thick-Origami, Alden Yellowhorse, Robert J. Lang, Kyler Tolman, and Larry L. Howell
Submissions from 2022
FLOWUnsteady: An Interactional Aerodynamics Solver for Multirotor Aircraft and Wind Energy, Eduardo Alvarez, Judd Mehr, and Andrew Ning
Meshless Large Eddy Simulation of Propeller-Wing Interactions with Reformulated Vortex Particle Method, Eduardo Alvarez and Andrew Ning
Optimization of solar-coal hybridization for low solar augmentation, Aaron T. Bame, Joseph Furner, Ian Hoag, Kasra Mohammadi, Kody Powell, and Brian D. Iverson
Considering Thickness-Accommodation, Nesting, Grounding and Deployment in Design of Miura-ori Based Space Arrays, Terri Bateman, Diana Bolanos, Nathan Brown, Brooklyn Clark, Larry L. Howell, Collin Ynchausti, Hunter Pruett, Jared Hunter, and Spencer P. Magleby
Incorporating High-Fidelity Aerostructural Analyses in Wind Turbine Rotor Optimization, Denis-Gabriel Caprace, Adam Cardoza, Andrew Ning, Marco Mangano, Sicheng He, and Joaquim R. R. A. Martins
Large Eddy Simulation of the Wakes of Three Urban Air Mobility Vehicles, Denis-Gabriel Caprace and Andrew Ning
Effects of rotor-airframe interaction on the aeromechanics and wake of a quadcopter in forward flight, Denis-Gabriel Caprace, Andrew Ning, Philippe Chatelain, and Grégoire Winckelmans
Impact of zirconia slurry in steel powder on melt pool characteristics in laser powder bed fusion, Taylor Davis, Tracy W. Nelson, and Nathan B. Crane
Retention Forces for Drops on Microstructured Superhydrophobic Surfaces, Shaur Humayun, R. Daniel Maynes, Julie Crockett, and Brian D. Iverson
A General Coupling Methodology for Unsteady Aerostructural Optimization with Analytic Derivatives, Taylor McDonnell, Adam Cardoza, Denis-Gabriel Caprace, and Andrew Ning
GXBeam: A Pure Julia Implementation of Geometrically Exact Beam Theory, Taylor McDonnell and Andrew Ning
Reliable Mode Tracking for Gradient-Based Optimization with Dynamic Stability Constraints, Taylor McDonnell and Andrew Ning
A Model to Calculate Fatigue Damage Caused by Partial Waking during Wind Farm Optimization, Andrew P.J. Stanley, Jennifer King, Christopher Bay, and Andrew Ning