Theses/Dissertations from 2015
Design and Validation of a Complex Loading Whole Spinal Segment Bioreactor, Amanda Marie Beatty
A Collaborative Conceptual Aircraft Design Environment for the Design of Small-Scale UAVs in a Multi-University Setting, Joseph Samuel Becar
An Investigation of Off-Design Operation in High Suction Performance Inducers, Ryan Collins Cluff
An Investigation of Friction Stir Welding Parameter Effects on Post Weld Mechanical Properties in 7075 AA, Steven B. Dickson
Aerodynamic Improvement of the BYU Supermileage Vehicle, Sayan Dobronsky
An Automated Method for Hot-to-Cold Geometry Mapping, Brandon Levi Doolin
Development of a Thickness Accommodation Technique for Origami-Inspired Design, Bryce Edmondson
Temperature Measurement Using Infrared Spectral Band Emissions From H2O, Daniel Jared Ellis
Deployable and Foldable Arrays of Spatial Mechanisms, Thomas Evans
Neutral Parametric Canonical Form for 2D and 3D Wireframe CAD Geometry, Robert Steven Freeman
Design and Manufacture of Mesoscale Robot-Actuated Surgical Instruments, Clayton L. Grames
Three-Dimensional Flow Measurements Around a Mechanical Flapping Wing, Eric R. Hardester
Elucidating the Mechanisms of Rate-Dependent Deformation at Ambient Temperatures in a Model Metallic Glass, Matthew Bradley Harris
Ligament Model Fidelity in Finite Element Analysis of the Human Lumbar Spine, Mitchell Scott Hortin
On the Free Surface Skipping Characteristics of Highly Deformable Elastic Spheres, Randy C. Hurd
Vision Based Multiple Target Tracking Using Recursive RANSAC, Kyle Ingersoll
Integrating Synchronous Collaborative Applications with Product Lifecycle Management Workflows, Jordan Lowell Johnson
Temperature and Stress Effect Modeling in Fatigue of H13 Tool Steel at Elevated Temperatures with Applications in Friction Stir Welding, Bradley Valiant Jones
Investigation of Parameters Affecting the Nanoinjection of HeLa 229 Cancer Cells, Tyler E. Lewis
Improving the Suction Performance and Stability of an Inducer with an Integrated Inlet Cover Bleed System Known as a Stability Control Device, Ryan K. Lundgreen
Transport Enhancement of Rate-Limited Chemical Reactions via Pt-Decorated, Carbon Nanotube Microarray Membranes, Kevin M. Marr
An Approach for Designing Origami-Adapted Products with Aerospace Mechanism Examples, Jessica Morgan
Using the Offset Panel Technique to Develop Innovative Origami-Based Applications, Michael Robert Morgan
Globally Consistent Map Generation in GPS-Degraded Environments, Paul William Nyholm
Burnout, NO, and Flame Characterization from an Oxygen-Enriched Biomass Flame, Steven Andrew Owen
Deformation Twin Nucleation and Growth Characterization in Magnesium Alloys Using Novel EBSD Pattern Analysis and Machine Learning Tools, Travis Michael Rampton
A Compliant Mechanism-Based Variable-Stiffness Joint, Jacob Marc Robinson
A Study of Carbon Infiltrated Carbon Nanotubes Fabricated on Convex Cylindrical Substrates for the Creation of a Coronary Stent, Warren Beecroft Robison
Characterization of Geometrically Necessary Dislocation Content with EBSD-Based Continuum Dislocation Microscopy, Tim Ruggles
Effects of Various Mobility Aids on Lower-Extremity Muscle Activity, Michael Ryan Sanders
Geometry and Material Properties of Vocal Fold Models, Kimberly Ann Stevens
Jet and Droplet Impingement on Superhydrophobic Surfaces, Jonathan Glenn Stoddard
Advancing Biomechanical Research Through a Camelid Model of the Human Lumbar Spine, Dean K. Stolworthy
Springback Force Considerations in Compliant Haptic Interfaces, Dallin R. Swiss
Springback Force Considerations in Compliant Haptic Interfaces, Dallin R. Swiss
Temperature Control in Friction Stir Welding Using Model Predictive Control, Brandon Scott Taysom
Concurrent Engineering through Parallelization of the Design-Analysis Process, Eric Joseph Wardell
A Multi-Objective Optimization Method for Maximizing the Value of System Evolvability Under Uncertainty, Jason Daniel Watson
Using STAR-CCM+ to Evaluate Multi-User Collaboration in CFD, Kasey Johnson Webster
Theses/Dissertations from 2014
Development of Tailsitter Hover Estimation and Control, Jason M. Beach
Analysis and Compression of Large CFD Data Sets Using Proper Orthogonal Decomposition, Trevor Jon Blanc
A Computational Hybrid Method for Self-Intersection Free Offsetting of CAD Geometry, Garrett Clark Bodily
Fault Detection for Unmanned Aerial Vehicles with Non-Redundant Sensors, Brandon Jeffrey Cannon
Aerodynamic Improvements for Auto-Carrying Railcars, Robert Arthur Condie
U-Pu-Zr Alloy Design by Ternary Potts-Phase Field Modeling, Jordan Jeffrey Cox
Compliant Joints Suitable for Use as Surrogate Folds, Isaac L. Delimont
System Identification of an Unmanned Tailsitter Aircraft, Nathan W. Edwards
An Experimental Study of Bio-Inspired Force Generation by Unsteady Flow Features, Wesley N. Fassmann
Characterization of Postural Tremor in Essential Tremor Using a Seven-Degree-of-Freedom Model, Daniel William Geiger
Modeling and Testing of Bistable Waterbomb Base Configurations, Brandon Holbrook Hanna
Microstructural Factors of Strain Delocalization in Model Metallic Glass Matrix Composites, Thomas James Hardin
A Variable-Stiffness Compliant Mechanism for Stiffness-Controlled Haptic Interfaces, Jeffrey C. Hawks
Conflict Management and Model Consistency in Multi-user CAD, Ammon Ikaika Hepworth
A Hybrid Method for Sensitivity Optimization With Application to Radio-Frequency Product Design, Abraham Lee
Design and Experimental Testing of Nanoinjection Protocols for Delivering Molecules into HeLa Cells with a Bio-MEMS Device, Zachary Kendall Lindstrom
Automated Landing Site Determination for Unmanned Rotocraft Surveillance Applications, Justin Keith Mackay
Validation of a Modified Version of OVERFLOW 2.2 for Use with Turbomachinery Under Clean and Total Pressure Distorted Conditions and a Study of Blade Loading in Distortion, Matthew L. Marshall
Application of Variation of Parameters to Solve Nonlinear Multimode Heat Transfer Problems, Travis J. Moore
Articulated Spine for a Robot to Assist Children with Autism, Brandon M. Norton
Characterization and Optimization of Thermal Protective Fabrics Designed to Protect Against Splash Hazards, Jeremy Osguthorpe
PIV Measurements of Turbulent Flow in a Rectangular Channel over Superhydrophobic Surfaces with Riblets, Richard Mark Perkins
Co-Firing Biomass with Biogas in Cookstoves with a Fan, Manil Poudyal
Biomechanical Applications and Modeling of Quantum Nano-Composite Strain Gauges, Taylor David Remington
Characterization of Smoothness in Wrist Rotations, Layne Hancock Salmond
Development of a Complex Synthetic Larynx Model and Characterization of the Supraglottal Jet, Jayrin Ella Seegmiller
Design and Analysis of Robotically-Controlled Minimally Invasive Surgical Instruments, Jordan D. Tanner
Elastic Energy Absorption via Compliant Corrugations, Sean S. Tolman
Investigating the Relationship Between High Temperature Flow Stress and Friction Stir Weldability in HSLA Steels, David Jordan Walser
Refinement and Characterization of Synthetic Vocal Fold Models, Shelby Charisse Ward
High Fidelity Time Accurate CFD Analysis of a Multi-stage Turbofan at Various Operating Points in Distorted Inflow, David Bruce Weston
Design Considerations in the Development and Actuation of Origami-Based Mechanisms, Eric W. Wilcox
Compliant Mechanisms for Deployable Space Systems, Shannon Alisa Zirbel
Theses/Dissertations from 2013
An Investigation into the Mechanisms of Formation of the Hard Zone in FSW X65, Jacob D. Allred
Mimicking the Mechanical Behavior of Advancing Disc Degeneration Through Needle Injections, Jeremy S. Alsup
The Water Entry of Slender Axisymmetric Bodies: Forces, Trajectories and Acoustics, Kyle Gordon Bodily
A Study of Action Origami as Systems of Spherical Mechanisms, Landen A. Bowen
Developing an Architecture Framework for Cloud-Based, Multi-User, Finite Element Pre-Processing, Jared Calvin Briggs
A Methodology for the Extraction of Design Principles for Unfamiliar Markets, Robert D. Campbell
Fluid-Structure Interactions with Flexible and Rigid Bodies, David J. Daily
Passive Stiffness of Coupled Wrist and Forearm Rotations, Will Brandon Drake
Variable Fidelity Optimization with Hardware-in-the-Loop for Flapping Flight, Michael Luke Duffield
Effect of Full-Annular Pressure Pulses on Axial Turbine Performance, Mark H. Fernelius
Origami-Based Design for Engineering Applications, Kevin Campbell Francis
Thermal Transport to Sessile Water Droplets on Heated Superhydrophobic Surfaces of Varying Cavity Fraction, Robb C. Hays
Real-Time Visualization of Finite Element Models Using Surrogate Modeling Methods, Ryan C. Heap
An Experimental Analysis of the Weighted Sum of Spatial Gradients Minimization Quantity in Active Structural Acoustic Control of Vibrating Plates, Daniel R. Hendricks
Active Structural Acoustic Control of Clamped and Ribbed Plates, William Richard Johnson
An Exploration of Carbon-Filled Carbon Nanotubes as a Potential Material in Coronary Stents, Kristopher Neil Jones
Development of a Sense and Avoid System for Small Unmanned Aircraft Systems, Robert Andrew Klaus
Investigations of Partially Immersed Spinning Spheres in a Liquid Bath and Butterfly Flight, Kenneth Roy Langley
Using Topology Optimization to Numerically Improve Barriers to Reverse Engineering, Devin Donald LeBaron
A Vision-Based Relative Navigation Approach for Autonomous Multirotor Aircraft, Robert C. Leishman
An Alternative System Identification Method for Friction Stir Processing, Dustin John Marshall
Fully Compliant Mechanisms for Bearing Subtraction in Robotics and Space Applications, Ezekiel G. Merriam
Popup Height and the Dynamics of Rising Buoyant Spheres, Randy H. Munns
Capillary Filling of Large Aspect Ratio Channels With Varying Wall Spacing, Dallin B. Murray
Vision-Based Guidance for Air-to-Air Tracking and Rendezvous of Unmanned Aircraft Systems, Joseph Walter Nichols
Dynamics and Control of Wrist and Forearm Movements, Allan W. Peaden
The Development of Updated and Improved SLW Model Parameters and Its Application to Comprehensive Combustion Predictions, John T. Pearson
Application of Machine Learning and Parametric NURBS Geometry to Mode Shape Identification, Robert Mceuen Porter