Keywords

continuous syngas fermentation, Clostridium ragsdalei, ethanol, trickle bed reactor

Abstract

A trickle-bed reactor (TBR) when operated in a trickle flow regime reduces liquid resistance to mass transfer because a very thin liquid film is in contact with the gas phase and results in improved gas–liquid mass transfer compared to continuous stirred tank reactors (CSTRs). In the present study, continuous syngas fermentation was performed in a 1-L TBR for ethanol production by Clostridium ragsdalei. The effects of dilution and gas flow rates on product formation, productivity, gas uptakes and conversion efficiencies were examined. Results showed that CO and H2 conversion efficiencies reached over 90% when the gas flow rate was maintained between 1.5 and 2.8 standard cubic centimeters per minute (sccm) at a dilution rate of 0.009 h−1. A 4:1 molar ratio of ethanol to acetic acid was achieved in co-current continuous mode with both gas and liquid entered the TBR at the top and exited from the bottom at dilution rates of 0.009 and 0.012 h−1, and gas flow rates from 10.1 to 12.2 sccm and 15.9 to 18.9 sccm, respectively.

Original Publication Citation

Devarapalli, M., Lewis, R. S., & Atiyeh, H. K. (2017). Continuous Ethanol Production from Synthesis Gas by Clostridium ragsdalei in a Trickle-Bed Reactor. Fermentation, 3(2), 23. https://doi.org/10.3390/fermentation3020023

Document Type

Peer-Reviewed Article

Publication Date

2017-05-24

Publisher

Fermentation

Language

English

College

Ira A. Fulton College of Engineering

Department

Chemical Engineering

University Standing at Time of Publication

Full Professor

Download

Share

COinS