Multivariate Control for Managed Pressure Drilling Systems Using High Speed Telemetry

Keywords

managed-pressure-drilling, high-speed telemetry, multivariate control

Abstract

With the recent advance in high-speed data communication offered by wired-drillpipe (WDP) telemetry, it is now possible to design automated control systems that directly use downhole data (e.g., pressure) to optimize drilling procedures. This research couples drilling hydraulics, rate of penetration (ROP), and rotational-speed (rev/min) control into a single controller for managed-pressure-drilling (MPD) systems. This novel multivariate controller improves drilling performance during normal drilling operations and enhances safety during abnormal drilling conditions such as unwanted gas-influx situations.

New advances in drilling automation have made the closed-loop control of downhole weight on bit (WOB) and drillstring rotational speed (rev/min) possible. This study uses two feedback controllers that control the downhole WOB and rev/min by use of surface data. A mutlivariate nonlinear model-predictive controller (NMPC) uses downhole and surface measurements to simultaneously regulate the bottomhole-assembly (BHA) pressure and maximize the ROP. For this purpose, NMPC provides the necessary set points for the WOB and rev/min feedback controllers and manipulates the choke-valve opening and pump-flow rates. Controller performance is enhanced by means of a nonlinear estimator that works continuously online with the NMPC and provides the necessary estimated parameter values (such as annulus density, friction factor, and gas influx) for precise and efficient drilling control.

The designed NMPC controller has a multipriority approach that is described in the following three scenarios: during unexpected gas influx, the NMPC gives priority to BHA pressure control and attenuates the influx effectively by means of a novel kick-attenuation method that switches the control objective from BHA pressure to choke-valve pressure; during connection procedures when adding a new stand, ROP is stopped and the NMPC focuses on maintaining the BHA pressure constant; and during normal drilling operation, which involves changes in the rock formation and differential pressures, NMPC gives priority to ROP maximization while maintaining rev/min, WOB, and BHA pressure within specified bounds.

Preliminary results suggest that this multivariate controller for ROP and BHA-pressure control decreases drilling costs, reduces operator workload, and minimizes risk significantly. Specific improvements in drilling performance include higher ROP, effective kick attenuation, and more-uniform cuttings. The use of a multivariate NMPC allows for better ROP optimization and BHA-pressure control than is possible with the use of two independent controllers. These benefits are demonstrated across the three scenarios mentioned previously. In simulation, this technology delivers significant performance improvements during MPD and furthers the development of automated-driller systems.

Original Publication Citation

Asgharzadeh Shishavan, Reza, et al. "Multivariate Control for Managed-Pressure-Drilling Systems by Use of High-Speed Telemetry." SPE Journal (2015).

Document Type

Peer-Reviewed Article

Publication Date

2016-04-02

Permanent URL

http://hdl.lib.byu.edu/1877/3610

Publisher

Society of Petroleum Engineers

Language

English

College

Ira A. Fulton College of Engineering and Technology

Department

Chemical Engineering

University Standing at Time of Publication

Assistant Professor

Link to Full Text

Share

COinS