Abstract
Inadequate understanding and/or control of the polyurethane rigid foam process normally requires five to ten percent overpack of cavities to obtain correct fill and foam characteristics. This practice of overpacking has resulted in excessive waste and cost.
Degree
MS
College and Department
Ira A. Fulton College of Engineering and Technology; Mechanical Engineering
Rights
http://lib.byu.edu/about/copyright
BYU ScholarsArchive Citation
Pugsley, Bruce A., "Sensitivity of Process Variables on Rigid Polyurethane Foaming" (1976). Theses and Dissertations. 7173.
https://scholarsarchive.byu.edu/etd/7173
Date Submitted
1976-12
Document Type
Thesis
Handle
http://hdl.lib.byu.edu/1877/Letd68
Keywords
Urethane foam
Language
English